4mp 32x IPズームカメラモジュール JM-G4032B

Product Overview

JM-G4032B is a 4 MP IP zoom module with a 4.8–154 mm lens and 32× optical zoom. The table lists up to 2560 × 1440 output, H.265/H.264/MJPEG choices, ONVIF Profile S/G/T, GB/T28181, audio and alarm I/O, RS485/RS232, microSD storage up to 512 GB, DC 12 V power and a 98.46 × 51.3 × 67 mm body.

JM-G4032B is a module; the host supplies enclosure and mounting. Start with 4 MP/32× frame-rate task.

Define the Image Requirement

Define 4 MP/32× frame-rate task before encoding or storage choices.

The stated use is integration into camera assemblies for projects such as petrochemical and electrical monitoring. That scope does not establish compatibility with a particular housing, recorder, VMS or PTZ assembly.

Fit the Module into the Host

Place 98.46 × 51.3 × 67 mm plus cables on the host drawing with lens and cable clearance.

Map the Interfaces

Show JM-G4032B DC 12 V, network, serial and I/O on the integration schematic, and distinguish mandatory signals from unused options.

Reserve the module’s power within the host calculation. Enclosure sealing and internal temperature control are responsibilities of the host design.

Prepare the Integration Request

Send the 4 MP/32× frame-rate task, the 98.46 × 51.3 × 67 mm envelope plus cables, and the required DC 12 V, network, serial and I/O connections. Specify the presets and commands needed by the host.

Selection Guidance

Review JM-G4032B in the Camera Module category around the required 4 MP/32× frame-rate task. The comparison also needs the 98.46 × 51.3 × 67 mm envelope, cable clearance, DC 12 V and the exact host interface set.

What is the first decision for JM-G4032B?

Begin with 4 MP/32× frame-rate task.

Which integration items need checking?

Match JM-G4032B DC 12 V, network, serial and I/O connections to the host functions that will actually be used.

What belongs on the mechanical drawing?

Show 98.46 × 51.3 × 67 mm plus cables, cables and clearances.

Which item must remain pending?

Keep any function not clearly defined by the retained table outside the order until it receives written confirmation.

Match JM-G4032B to the Frame-Rate Task

Start with the required 4 MP image and frame-rate plan, then apply the 4.8–154 mm, 32× lens range. Encoding, streaming and storage selections should follow that workload. The module specification does not establish a finished camera housing or compatibility with an unnamed PTZ assembly.

The host drawing must contain the 98.46 × 51.3 × 67 mm body plus connector and cable space. Add the lens path and installation direction so the module can be assembled and serviced. Sealing and internal temperature management remain part of the surrounding product design.

Separate the DC 12 V supply from network, RS485/RS232, audio, alarm and other I/O on the schematic. Select only the signals the finished camera will use. The retained table also lists ONVIF Profile S/G/T, GB/T28181 and microSD up to 512 GB; each needs a defined role in the host architecture.

JM-G4032B Design Freeze

Freeze the design after the frame-rate requirement, optical envelope and electrical connections agree. Confirm connector access and the host power budget before making the carrier. Any claim about weather protection, recorder fit or PTZ compatibility must come from the completed system evidence, not the module page.

The integration record should also name the stream stored on microSD, if local storage is used, and distinguish it from network delivery. Keep unused alarm or audio lines off the released schematic.

Send JM-G4032B Project Details

Use お問い合わせ to send the 4 MP/32× frame-rate task, the drawing and required functions. Note any unresolved interface or control requirement separately.