2MP 32X IPズームカメラモジュール JM-G2032A

Product Overview

JM-G2032A is a 2 MP IP zoom module with a 4.8–154 mm lens and 32× optical zoom. The table lists up to 1920 × 1080 output, H.265/H.264/MJPEG choices, ONVIF Profile S/G/T, GB/T28181, audio and alarm I/O, RS485/RS232, microSD storage up to 512 GB, DC 12 V power and a 98.46 × 51.3 × 67 mm body.

JM-G2032A is a module; the host supplies enclosure and mounting. Start with 2 MP/32× host task.

Define the Image Requirement

Define 2 MP/32× host task before encoding or storage choices.

The stated use is integration into camera assemblies used in fields such as petrochemical and electrical projects. That scope does not establish compatibility with a particular housing, recorder, VMS or PTZ assembly.

Fit the Module into the Host

Place 98.46 × 51.3 × 67 mm plus cables on the host drawing with lens and cable clearance.

Map the Interfaces

Draw the JM-G2032A DC 12 V, network, serial and I/O connections on the host schematic, including connector orientation and the lines that will remain unused.

Allocate module power in the host design. The surrounding enclosure must provide the required sealing and thermal management.

Prepare the Integration Request

Send the 2 MP/32× host task, the 98.46 × 51.3 × 67 mm envelope plus cables, and the required DC 12 V, network, serial and I/O connections. Identify which preset and control functions the host will use.

Selection Guidance

Compare JM-G2032A with units in the Camera Module category against the 2 MP/32× host task. Check the 98.46 × 51.3 × 67 mm body, cable space, DC 12 V supply and required network or serial functions as one integration package.

What is the first decision for JM-G2032A?

Begin with 2 MP/32× host task.

Which integration items need checking?

For JM-G2032A, map DC 12 V, network, serial and I/O lines to the host schematic and the required control functions.

What belongs on the mechanical drawing?

Show 98.46 × 51.3 × 67 mm plus cables, cables and clearances.

Which item must remain pending?

Keep any function not clearly defined by the retained table outside the order until it receives written confirmation.

Design the JM-G2032A Host Bay

The image requirement starts with 2 MP output and the 4.8–154 mm, 32× lens. Choose the needed stream format, storage and control functions from the retained table after that task is clear. The module is not a finished camera, so no housing or PTZ fit should be inferred from its optical specification.

Reserve at least the stated 98.46 × 51.3 × 67 mm body envelope, then add cable and lens clearance. Draw connector access and the direction in which the assembly will be installed. The host is responsible for mounting, environmental sealing and the thermal conditions around the module.

Show DC 12 V, network, RS485/RS232, audio, alarm and any used I/O on the host schematic. Only connected functions should enter the bill of materials. ONVIF Profile S/G/T, GB/T28181 and microSD capacity up to 512 GB can be checked against the system plan without promising a particular third-party platform.

JM-G2032A Integration Review

Review the optical task, body envelope and connector schedule as one host design. Make sure the enclosure provides the missing environmental protection and that DC 12 V reaches the module correctly. Any host-specific fit or function not established by the retained table requires its own engineering confirmation.

Send JM-G2032A Project Details

Use お問い合わせ to send the 2 MP/32× host task, the drawing and required functions. Note any unresolved interface or control requirement separately.