JM-G4133B combines 4 MP imaging, a 5.3–175 mm autofocus lens and 33× zoom. The host design must accommodate its three-stream plan and 36-pin FFC connection; Weight remains blank.
JM-G4133B is a 4 MP IP zoom module with a 5.3–175 mm autofocus lens and 33× optical zoom. The table lists up to 2560 × 1440 at 25 fps, three streams, H.265/H.264/MJPEG, ONVIF and GB/T28181, one alarm input/output, TF storage up to 256 GB, a 36-pin FFC interface, RS232/VISCA, RS485/Pelco and DC 12 V power.
JM-G4133B is a module; the host supplies enclosure and mounting. Start with 4 MP/33× three streams.
Define 4 MP/33× three streams before encoding or storage choices.
The stated use is integration into a project-built camera or imaging assembly that needs optical zoom and IP video. That scope does not establish compatibility with a particular housing, recorder, VMS or PTZ assembly.
Place L100.1 × W50 × H60 mm and 36-pin cable on the host drawing with lens and cable clearance.
Map DC 12 V, VISCA and Pelco to the schematic and verify electrical details.
Include JM-G4133B in the host power calculation. The integrator must provide enclosure sealing and manage heat within the completed camera.
Send 4 MP/33× three streams, L100.1 × W50 × H60 mm and 36-pin cable and DC 12 V, VISCA and Pelco; keep blank Weight explicit.
| JM-G4133B | |
| Camera module | |
| Image Sensor | Sony 1/2.8″ CMOS |
| Optical Zoom | 5.3-175mm，33x Optical zoom |
| Electronic Shutter | 1/25~1/100000 |
| Mini. Illumination | color@0.01Lux(AGC ON) ，B/W@0.005Lux(AGC ON) |
| Angle of View | 57-1.7 °(wide angle – telephoto) |
| Close-up distance | 100mm-infinity (wide angle-telephoto) |
| Zoom Speed | About 5 seconds (optical, wide angle-telephoto) |
| Day / Night | ICR automatic filter switching, support image algorithm, time period, serial port trigger |
|
Video Parameters |
|
| Main Bitstream | PAL:（ 2560×1440,1920×1080,1280×720）25fps |
| NTSC:（2304×1296,1920×1080,1280×720）30fps | |
| Auxiliary stream | PAL:（720×576，352×288）25fps |
| NTCS:（720×480，352×240）30fps | |
| The third stream | PAL:（720×576，352×288）25fps |
| NTCS:（720×480，352×240）30fps | |
| Focus | Auto/Manual/Semi-auto/One-shot focus (effective in auto mode) |
| WDR | 120dB |
| Image adjust | Brightness, Contrast, Saturation, Sharpness, Chroma |
| Image Setting | Area Mask, WDR, Anti-flicker, Defogging, Mirroring, Aisle Mode, Rotation, BLC, HLC, Exposure Compensation, Defective Pixel Compensation, Power Loss Recovery, Distortion Correct, DIS, 3D Position |
|
Network compression function |
|
| Smart Alarm | Motion Detection, Camera Shaded, Network Disconnected, IP Conflict, HDD Error, HDD Full |
| Support Protocols | TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,PPPoE,NTP,UPnP,IGMP,QoSR,RTMP,IPV6 |
| Access Protocols | ONVIF，GB/T28181，Domestic mainstream protocols |
| Function | Three-stream, password protection, heartbeat, IP blacklist and whitelist, local storage when disconnected, continuous transmission when disconnected, maximum 20-channel preview |
| Compression Standard | H.264/H.265：Baseline，Main Profile，High Profile，MJPEG |
| Compressed output bit rate | 64 Kbps~16Mbps |
| Audio compression standards | G.711A、AAC、G711U、G726 |
| Audio compression bit rate | 8/16Kbps |
|
Interface definition |
|
| Storage | TF Card local storage 256G (class10 is recommended) |
| 36pin FPC interface | 36pin FFC (power, network port, indicator light, RS485, RS232, SDHC, Alarm In/Out, Line In/Out, reset, SD card data interface) |
| Extension ports | 1 USB interface, 1 URAT interface |
| Communication Definition | RS232 interface (VISCA protocol), RS485 interface (Pelco protocol) |
|
General |
|
| Power supply | DC 12V ±25% |
| Power consumption | Static: 2.5w Dynamic: 4.5w |
| Temperature and humidity | -20℃ – +60℃,Humidity less than 95% (no condensation) |
| Dimension | L100.1*W50*H60mm |
| Weight | |
For JM-G4133B, use the Camera Module category to compare 4 MP/33× options for a three-stream plan. Review the L100.1 × W50 × H60 mm module, 36-pin cable, DC 12 V and required VISCA or Pelco control together.
Begin with 4 MP/33× three streams.
Check DC 12 V, VISCA and Pelco against required host functions.
Show L100.1 × W50 × H60 mm and 36-pin cable, cables and clearances.
Keep blank Weight unresolved until written confirmation.
Set the 4 MP, three-stream requirement against the 5.3–175 mm autofocus lens and 33× zoom. The page lists up to 2560 × 1440 at 25 fps, so the host plan should state which stream serves viewing, recording or another defined function.
Fit the L100.1 × W50 × H60 mm body with room for the 36-pin FFC cable and lens clearance. The retained Weight cell is blank and must stay unresolved; it cannot be estimated from dimensions or from another module. The host also supplies the enclosure and mounting arrangement.
Choose RS232/VISCA, RS485/Pelco or the required combination, then show the DC 12 V connection and alarm I/O on the electrical drawing. TF storage up to 256 GB is available, but its role should be decided alongside the three-stream design rather than treated as automatic recording capacity.
Accept the module layout only when the 36-pin cable can be installed and serviced without entering the lens space. Check the three-stream purpose and serial-control choice against the receiving board. Keep Weight blank until a product-specific value is supplied.
Record which stream, alarm line and storage path the host will use. That short interface schedule prevents optional signals from being treated as mandatory wiring.
Use Contact Us to send 4 MP/33× three streams, the drawing and required functions. Identify blank Weight as pending.
