The JM-G2125A is an IP zoom module for a camera builder who needs 2 MP video, autofocus and 25× optical zoom. It belongs inside a larger assembly. Housing, support, cable connections and environmental protection come from the finished-camera design, so module selection must begin with that host layout.
The first decision is whether the host has room for the lens movement, board and cable connection. Once that mechanical fit is clear, the 5–125 mm autofocus lens can be assessed against the required field of view. Resolution, frame-rate and PAL/NTSC choices are set out in the table.
The bare module has no stated outdoor rating, and its Weight row is empty. Both values remain unresolved; another camera is not a valid source for them.
Begin with the viewing task. Define the wide view, the closest useful view and how quickly the operator must move between them. Then decide whether viewing and recording need separate streams. The module can produce as many as three, with encoding options shown in the specification table.
Lighting controls should follow the scene rather than drive the purchase. WDR, highlight and backlight compensation, defog, anti-flicker and day/night functions are available. They provide adjustment range; they cannot make every target look the same under different light.
Place the 36-pin FFC/FPC connection on the host drawing and check cable orientation and bend space. After that, choose serial or network control from the interface rows in the table. If the finished product will use alarm or audio signals, mark those connections as well.
Protocol names identify a route for integration; they do not settle the entire interface. Compare the commands and streams required by the host with the functions the module exposes. Apply the same approach to local storage: capacity is one input, while recording behavior comes from stream settings and finished-system software.
Body dimensions alone are not the enclosure envelope. Reserve extra room for the connector, cable and moving lens. On the electrical side, allocate power from the dynamic figure in the table rather than the lower static value.
The temperature and humidity rows describe the module. The finished camera still needs its own thermal path, condensation control and enclosure rating.
Zoom ratio is only one input. Compare the field of view, stream format, control route, available space and power budget together. Other imaging options are grouped in the Camera Module category.
| JM-2125A | |
|
카메라 모듈 |
|
| 이미지 센서 | 소니 1/2.8인치 CMOS |
| 광학 줌 | 5-125mm, 25배 광학 줌 |
| 전자 셔터 | 1/25~1/100000 |
| 미니. 조명 | Color@0.01Lux （AGC ON），B/W@0.05Lux(AGC ON) |
| 화각 | 59.6-3.5°(와이드 텔레) |
| 클로즈업 거리 | 100mm-200mm(Wide-Tele) |
| 줌 속도 | 3초(광학, 와이드~텔레) |
| 낮 / 밤 | ICR 자동 필터 전환, 이미지 알고리즘, 기간, 직렬 포트 트리거 지원 |
|
비디오 매개변수 |
|
| 주요 비트스트림 | PAL:(1920 × 1080,1280 × 720)25fps |
| NTSC: (1920 × 1080,1280 × 720)30fps | |
| 하위 비트스트림 | PAL：（720×576，352×288）25fps |
| NTCS：（720×480，352×240）30fps | |
| 집중하다 | 자동/수동/반자동/원샷 초점(자동 모드에서 유효) |
| WDR | 120dB |
| 이미지 조정 | 밝기, 대비, 채도, 선명도, 크로마 |
| 이미지 설정 | 영역 마스크, WDR, 깜박임 방지, 디포깅, 미러링, 통로 모드, 회전, BLC, HLC, 노출 보정, 결함 픽셀 보정, 전력 손실 복구, 왜곡 보정, DIS, 3D 위치 |
|
네트워크 압축 기능 |
|
| 스마트 알람 | 모션 감지, 카메라 음영, 네트워크 연결 끊김, IP 충돌, HDD 오류, HDD 가득 찼습니다. |
| 지원 프로토콜 | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, RTP, RTSP, RTCP, NTP, SMTP, SNMP, IP |
| 액세스 프로토콜 | ONVIF，GB/T28181，국내 주류 프로토콜 |
| 기능 | 듀얼 스트림, 비밀번호 보호, 하트비트, IP 블랙리스트 및 화이트리스트, 연결 해제 시 로컬 스토리지, 연결 해제 시 연속 전송, 최대 20개 채널 미리보기 |
| 압축 표준 | H.264/H.265: 베이스라인, 메인 프로파일, 하이 프로파일, MJPEG |
| 압축 출력 비트 전송률 | 64Kbps~16Mbps |
| 오디오 압축 표준 | G.711A、AAC、G711U、G726 |
| 오디오 압축 비트 전송률 | 8/16Kbps |
|
인터페이스 정의 |
|
| 저장 | TF 카드 로컬 스토리지 256G(클래스10 권장) |
| 36핀 FPC 인터페이스 | 36핀 FFC(전원, 네트워크 포트, 표시등, RS485, RS232, SDHC, 알람 입력/출력, 라인 입력/출력, 리셋, SD 카드 데이터 인터페이스) |
| 확장 포트 | USB 인터페이스 1개, URAT 인터페이스 1개 |
| 커뮤니케이션 정의 | RS232 인터페이스(VISCA 프로토콜), RS485 인터페이스(Pelco 프로토콜) |
|
일반 |
|
| 전원 공급 장치 | DC 12V±25% |
| 전력 소비 | 정적: 2.5W 동적: 4.5W |
| 온도 및 습도 | -20℃ - +60℃, 습도 95% 미만(결로 없음) |
| 차원 | L91.8*W50*H60mm |
| 무게 | |
차원
Send the field of view, stream requirement, control route and available enclosure space. Add the power budget, storage plan and any alarm or audio use. For a moving assembly, include the host drawing and cable route.
No. The finished product still needs an enclosure, mounting, environmental protection and external connections.
It reaches 1920 × 1080 at 30 fps and supports up to three streams. Encoding choices are shown in the table.
Serial and network control are available. Use the table to match the required protocol and the 36-pin connection to the host.
Yes. It accepts TF/SD storage up to 256 GB, with Class 10 recommended. Software and stream settings determine recording behavior.
Use 저희에게 연락하십시오 to send the host layout, power input, controls, stream requirement and operating environment.
