Blog

What is the difference between PTZ and panoramic cameras?

What is the difference between PTZ and panoramic cameras

What is the difference between PTZ and panoramic cameras

Introducing Shuoxin: A Leader in Outdoor Security Surveillance

Outdoor security surveillance over long distances calls for tools that work well and hold up in tough spots. This is where Changzhou Shuoxin Electronic Technology Co., Ltd. shines. As a company focused on tech, it designs and makes smart security monitoring gear. Shuoxin has earned a name for steady and trustworthy top-notch items. Their products cover smart PTZ setups, heat-sensing cameras, and tools for checks on the move. These fit hard places like busy roads, edge guards, and quick response needs.

Shuoxin sets itself apart with a strong push for new ideas and solid checks on quality. It has good skills in building products, a full setup for tests, and ISO9001 approval. This means every item hits tough country and field rules. If you handle city street watching or guard key setups, their tools aim to give exact work, lasting strength, and room to grow.

To check out their whole line of pro watching systems, head to Shuoxin’s official website.

Defining PTZ Cameras

PTZ cameras get built for bendy action and quick replies. “PTZ” means Pan-Tilt-Zoom, which points to the camera’s skill to turn side to side (pan), shift up and down (tilt), and grow close-ups with lenses (zoom). These steps let it follow people or things right then, so they prove key in watch spots that need hands-on guide.

Fitted with motor parts, PTZ units give aimed looks at set spots in big zones. You can guide them from afar or set auto paths with saved spots and watch lines. This works best where steady watch from one angle falls short.

For example, the New Bi-Spectral Thermal Imaging Dome PTZ Camera stands as a top PTZ pick for clear, far-off checks. It has 33x lens zoom and a 5.5–180mm setup that shifts from broad to close shots with sharp pictures.

Defining Panoramic Cameras

Panoramic cameras differ from PTZ ones that use moving parts, as they give still wide views of the whole scene. They use a round lens or several sensors to grab 180° or 360° sights in one smooth flow. Their main plus is keeping track of the full area without turns or close-ups.

This steady broad watch fits spots where following motion does not matter, but grasping the whole setup counts. Still, these cameras often miss lens zoom and turn to digital fixes to zoom on parts of the view.

Due to how they get made, panoramic types suit inside or near spots better than wide outdoor areas like streets or factory edges.

Field of View and Coverage Capabilities

The main split between PTZ and panoramic cameras starts with how they handle space.

A PTZ camera gives sharp views with zoom power, but it can only look one way at a time. This makes it great for tailing motion or zeroing on events, yet not so good for holding a full picture of a whole zone all at once.

On the other hand, panoramic cameras hand out non-stop looks at large areas in one shot. But their fixed style cuts their flex—once set up, they stick to one view that won’t change angles or dig into small details.

If your aim means lively watch over many hundreds of meters—like road checks—a strong PTZ fits better thanks to its point control and zoom reach.

Movement and Tracking Features

A big plus for PTZ systems comes from their motion skills. You can set them to spot motion or use hand controls to trail things live. Take the New Bi-Spectral Thermal Imaging Dome PTZ Camera; it backs 300°/s side speed and 120°/s up-down speed with full 360° turns that never stop. These traits allow fast shifts and steady follows over rough lands.

Panoramic models have no moving bits at all. They count on lens plans and software shifts for side looks. While this cuts down on part wear, it also holds back their quick match to changing views.

When you watch spots where motion shifts fast—like edge lines or quick command areas—hand or auto PTZ changes give better all-around use.

Image Detail and Zoom Functionality

Zoom power often tips the scale in picking cameras. PTZ types use lens zoom to catch far-off items with clear lines. The New Bi-Spectral Thermal Imaging Dome PTZ Camera brings a 33x lens zoom (5.5–180mm) that moves from a 60.5° broad look to a tight 2.3° close one.

This lets you spot car tags, face lines, or gear parts from hundreds of meters— a task panoramic cameras can’t match with their set focus range.

Plus, adding heat sensing boosts detail grabs no matter the light. Its VOx uncooled FPA detector gives up to 640×512 clearness in the 8–14μm wave band, allowing watch in all weather types.

When to Use a PTZ Camera

PTZ cameras prove vital in cases that call for lively guide over far stretches. City paths, shore guards, woods fire watch setups, and police rides gain a lot from these traits.

A top pick is the Highway PTZ Camera with Network Positioning System. It packs built-in parts like a code reader, guard shell, auto warmer, and shade—all in a tough aluminum case with IP66 guard level. Its motor shifts offer side speeds to 100°/s and up-down to 30°/s, plus 256 saved spots and six watch paths.

These skills make it right for edge guards at power spots or tall building watches—any place far-off sight and exact guide matter most.

 

Highway PTZ camera with Network Positioning System

When to Use a Panoramic Camera

Even if not great for far-off outdoor watches, panoramic cameras can fit into guard plans that need set track of open lands or cross points. But without lens zoom or moving parts, their role stays small in spots that ask for close-up spots from far.

If your setup spot never needs point shifts or live thing follows, panoramic units could work—but they won’t stand in for far-off lively watch systems.

Combining Both Camera Types for Enhanced Surveillance

In certain setups, mixing both techs gives the top from each. A panoramic camera can show the full scene while sending tips or spot hits to a close PTZ for better looks.

This mix does well in tricky outdoor areas like travel spots or power sites where full grasp pairs with close watch. For one, teaming a heat PTZ with a broad still sensor makes sure no event slips by, while setting up exact next steps when needed.

New Bi-Spectral Thermal Imaging Dome PTZ Camera Features

This two-way tool blends light sight with heat feel in one small dome case. It has clever checks like face spots, break-in warns, group watches, sound picks, and others. The camera also brings auto home spots and set RS485 link support for easy fit into old setups.

With built-in thaw and clear-air systems, it works in rough weather changes—perfect for outdoor use on quick check paths or edge guard frames.

Highway PTZ Camera with Network Positioning System Advantages

This type gets made for strong spots like fast roads and shore lines. Its laser night sight goes to 1000 meters, while day checks reach 2.5 kilometers. With HD-SDI out support and choice 90x zoom plans, it grabs live high-clear pictures without waits.

Owing to its built-in power steady tool and IP66 guard rate, this camera keeps work steady even in shaky power—giving full-day run with little fix needs.

Choosing the Right Camera Based on Your Needs

Before you put money into any watch system, make clear what you want:

  • Do you need live thing follows?
  • Is your setup outside with changing lights or wild temps?
  • How far does your camera need to see—150 meters? A kilometer?

If your picks point to lively watches over far ways in rough spots, a top PTZ tool will fill those wants well.

Think too about power choices (AC24V/110V/220V), guide links (RS485), and weather rates (IP66). These tech bits hit system trust in real uses like edge walks or far power checks.

In picking the best camera, start by listing your main goals for the setup. Ask if you plan to track moving items in real time, as this often calls for a camera that can adjust quickly. Outdoor sites face changing light levels and sharp temperature drops, so pick gear that stands up to those without failing. Distance matters a lot; for views beyond 150 meters up to a full kilometer, you need strong zoom to keep details sharp.

Many users overlook how power sources affect daily use, but options like AC24V, 110V, or 220V ensure the camera runs smooth no matter the site setup. Control methods, such as the reliable RS485 protocol, allow easy links to your current network, cutting down on setup headaches. Weather protection ratings, especially IP66, mean the device blocks dust and water, key for spots exposed to rain or wind.

Shuoxin builds all its products with these factors in mind, so you get tools that not only meet basic needs but also handle long-term demands in places like busy highways or remote guard posts. Take time to match your site’s unique challenges to the camera’s strengths, and you’ll end up with a system that boosts safety without extra costs down the line.

FAQ

Q: What type of camera should I use for monitoring over 500 meters?
A: A PTZ camera with high optical zoom—such as one offering 33x or higher—is recommended for clear visibility at such ranges.

 

Q: Can panoramic cameras replace PTZ systems in outdoor environments?
A: Not effectively. Panoramic cameras lack optical zoom and mechanical movement; they’re better suited for fixed-location awareness rather than dynamic long-range surveillance.

 

Q: Is thermal imaging necessary for road or perimeter monitoring?
A: Yes. Thermal sensors ensure visibility even in total darkness or foggy conditions, enhancing security during nighttime operations or harsh weather events.

 

Share:

Facebook
Twitter
LinkedIn

Consult and find problems

Contact us to start a convenient communication journey. Whether you have questions about our products, want to consult service details, or have cooperation intentions and valuable suggestions, you can get in touch with us through the following methods.

en_USEnglish