WL-HLC-HD-IR is a compact vehicle PTZ dome with 2 MP imaging, 33× optical zoom and a 50 m infrared rating. Match its DC input, dome clearance and control route to the target vehicle.
WL-HLC-HD-IR is a compact vehicle dome with 2 MP imaging, 33× zoom and a 50 m infrared rating. It provides continuous 360° pan, -20° to +90° tilt, ONVIF Profile S/G, web or RS485 control, IP66, DC 10.8–18 V input and a 2.5 kg weight. Shock absorbers, heated glass and wiper support are listed.
Select WL-HLC-HD-IR around 50 m IR scene and vehicle voltage. Define that task before comparing options.
Build the operator sequence around 50 m IR scene and vehicle voltage; state the view, detail and mode change needed.
Vehicle and marine surveillance, law-enforcement, emergency, fire-control and ambulance installations are identified uses. The specific vehicle determines voltage behavior, dome clearance and the night scene that must be evaluated.
Put 2.5 kg dome clearance on the drawing and leave unresolved mechanics pending.
Map web or RS485 to host functions one by one rather than relying on names.
Check installed power and cabling; keep scene-dependent IR separate until confirmed.
Send 50 m IR scene and vehicle voltage, 2.5 kg dome clearance and web or RS485; flag scene-dependent IR for confirmation.
| MOdel No. | WL-HLC-HD-IR |
| Telecamera visibile | |
| Sensore di immagine | 1 {{url_placeholder_0}} scansione progressiva |
| Pixel efficaci | 1920 (h) x 1080 (V), 2 megapixel; |
| Illuminazione minima | Colore: 0.001 Lux @(F1.5, AGC ON); b {{url_placeholder_0}} @(f1.5, AGC ON) |
| Lunghezza focale | 5.3-175mm |
| Zoom ottico | Zoom ottico 33x, 16x zoom digitale |
| Gamma di aperture | F1.5-F4.0 |
| Campo visivo orizzontale | 60.5-2.3 ° （Wide-Tele） |
| Distanza di lavoro minima | 100mm-1000 mm (wide-tele) |
| Velocità di zoom | Circa 3,5 secondi (obiettivo ottico, ampio a Tele) |
| Compressione video | H.265 / H.264 / MJPEG |
| Impostazioni dell'immagine | Modalità corridoio, saturazione, luminosità, contrasto, nitidezza regolata da IE/ client |
| Day {{url_placeholder_0}} switch | Autigure automatico, manuale, tempismo, allarme |
| Riduzione del rumore 3D | Supporto |
| Protocollo di interfaccia | Onvif (profilo s, profilo G) |
| Rilevamento intelligente | Rilevamento transfrontaliero, rilevamento di intrusioni di area, rilevamento dell'area di entrata / uscita, rilevamento del manico, rilevamento della raccolta del personale, rilevamento rapido del movimento, rilevamento / rilevamento del parcheggio, rilevamento delle modifiche alla scena, rilevamento audio, rilevamento falso a fuoco, rilevamento del viso |
| Day {{url_placeholder_0}} switch | Autigure automatico, manuale, tempismo, allarme |
| Distanza IR | 50m |
| Ptz | |
| Velocità di preimpostazione di Pan | 300 °/s |
| Inclinare la velocità preimpostata | 120 °/s |
| PAN MANUALE SPEED Control | 0 ° ～ 220 °/s |
| Inclinare il controllo della velocità manuale | 0 ° ～ 90 °/s |
| Pan Angle | Rotazione infinita a 360 ° |
| Angolo di inclinazione | -20 ° ～+90 ° |
| Preimpostazione | 256 Posizioni 6 Tracciamento |
| Metodo di controllo | Rs485, tasso di baud opzionale da 2400 bps a 19200 bps |
| Umidità relativa | <90% |
| Livello di protezione | IP66 |
| Temperatura operativa | -35 ° C ～+65 ° C. |
| Consumo energetico | DC10.8V ～ DC18V |
| Requisiti di resistenza all'imbito | ≥4G |
| Tergicristallo | supporto |
| Metodo di installazione | Vari metodi di installazione sono opzionali in base all'ambiente dell'applicazione |
| Peso | 2.5kg |
Use the Vehicle PTZ Camera category to compare mobile PTZ choices. For WL-HLC-HD-IR, review the 50 m infrared task together with vehicle voltage, dome clearance and the selected web or RS485 control path.
Begin with 50 m IR scene and vehicle voltage.
Check web or RS485 against required host functions.
Show 2.5 kg dome clearance, cables and clearances.
Keep scene-dependent IR unresolved until written confirmation.
The 50 m figure is the listed infrared rating, not a promise about target detail in every road scene. Define the required night view, ambient light and camera position before using that rating in a selection. Daytime framing should also account for the 33× optical zoom and the movement needed during patrol work.
Use the 2.5 kg weight and dome envelope on the roof or console drawing. Check the -20° to +90° tilt range against bodywork, lamps and other equipment around the camera. Shock absorbers, heated glass and wiper support are listed features, but the vehicle still needs a practical fixing surface and cable entry.
Power must remain within the stated DC 10.8–18 V input at the camera. Select web control, RS485 or both according to the vehicle system, then identify which ONVIF Profile S/G functions are needed at the receiving side. Compatibility with a specific recorder is not implied.
Sign off the WL-HLC-HD-IR package after the night-view requirement, supply range and dome clearance agree across the inquiry and drawing. Verify the chosen control path and cable entry on the actual vehicle layout. Treat scene performance beyond the stated infrared rating as a project question, not as an automatic result.
Use Contattaci to send 50 m IR scene and vehicle voltage, the drawing and required functions. Identify scene-dependent IR as pending.
