WL-TX30-HD-RCX is a heavy-load bi-spectral PTZ for long-range site observation. Use the retained visible/thermal baseline, then check wind, support, DC 12 V and host control for the actual structure.
WL-TX30-HD-RCX is a heavy-load bi-spectral PTZ. The retained baseline is a 2 MP visible channel with 52× optical zoom and a 640 × 512 thermal channel using a 30–150 mm lens. Continuous pan, RS485, ONVIF Profile S/G, IP66, wiper support and DC 12 V are also listed.
Select WL-TX30-HD-RCX around standard visible/thermal build. Define that task before comparing options.
Build the operator sequence around standard visible/thermal build; state the view, detail and mode change needed.
Forest-fire prevention, railways, substations, borders, coasts, fan blades, photovoltaic sites, airports, reservoirs, oil facilities, factories and ecological areas are listed uses. Wind, support and lens selection still belong to the specific site design.
Put heavy-load support and wind on the drawing and leave unresolved mechanics pending.
Map DC 12 V, RS485 and ONVIF to host functions one by one rather than relying on names.
Check installed power and cabling; keep optional lenses separate until confirmed.
Send standard visible/thermal build, heavy-load support and wind and DC 12 V, RS485 and ONVIF; flag optional lenses for confirmation.
| MOdel Nr. | WL-TX30-HD-RCX |
| Sichtbare Kamera | |
| Bildsensor | 1 {{url_placeholder_0}} progressive Scan -CMOs |
| Effektive Pixel | 1920 (h) x 1080 (v), 2 Megapixel; |
| Mindestbeleuchtung | Farbe: 0,0005 lux @(f1.4, agc on); b {{url_placeholder_0}} @(f1.4, agc on) |
| Brennweite | 6.1-317mm |
| Optischer Zoom | Optischer Zoom 52x, 16x Digital Zoom |
| Blendenbereich | F1.4-F4.7 |
| Horizontales Sichtfeld | 61,8-1,6 ° （breites Tele） |
| Mindestarbeitsabstand | 100 mm-2000mm (Weit-Tel.) |
| Zoomgeschwindigkeit | Ungefähr 5s (optisches Objektiv, breit zu Tele) |
| Videokomprimierung | H.265 / H.264 / MJPEG |
| Schnittstellenprotokoll | ONVIF (Profil S, Profil g) |
| Intelligente Erkennung | Erkennung grenzüberschreitender, Erkennung von Flächen, Eingangs- / Verlassen der Flächenerkennung, schwebende Erkennung, Erfassungserkennung, Erkennung schneller Bewegung, Parkerkennung / Erkennung von Szenen, Erkennung von Szenenänderungen, Audio-Erkennung, falsche Fokuserkennung, Gesichtserkennung |
| Wärmebildgebung | |
| Detektortyp | Unkühlter Vanadiumoxiddetektor |
| Auflösung {{url_placeholder_0}} Abstand | 640 × 512 |
| Antwortband | 8 ~ 14 μm |
| Pixelgröße | 12 μm |
| Wärmeleitlinse Brennweite | 30 mm ～ 150 mm |
| Empfindlichkeit | <35 mk (@25 ° C, F# = 1,0) |
| Falsch Farbmodus | Weiß heiß, schwarz, heiß, Fusion 1, Regenbogen, Fusion 2, Eisenrot 1, Eisenrot 2, Sepia, Farbe 1, Farbe 2, Eisfeuer, Regen, heiß, grün blau, dunkelblau |
| PTZ | |
| Pan Preset -Geschwindigkeit | 100 °/s |
| Neigungsgeschwindigkeit | 60 °/s |
| Pan -Steuergeschwindigkeit | 0 ° ~ 60 °/s |
| Neigungssteuerungsgeschwindigkeit | 0 ° ~ 40 °/s |
| Pfanne | 360 ° Drehung |
| Neigungsbereich | +90 ° ~ -90 ° |
| Voreingestellte Positionen 、 Verfolgung | 256 Positionen 8 Tracking |
| Kontrollweg | RS485, eingebaute Pelco d {{url_placeholder_0}} 16 Protokoll, Baudrate von 2400 Bit / s bis 19200bit / s optional |
| Relative Luftfeuchtigkeit | Weniger als 90% |
| IP -Note | IP66 |
| Arbeitstemperatur | -35 ° ~ +55 ° |
| Wischer | Unterstützung |
| Gewicht | 8 kg |
Related products are grouped in the Heavy Load PTZ Series category. Compare the imaging task, mounting, power and control route together rather than selecting on one distance or zoom figure.
Begin with standard visible/thermal build.
Check DC 12 V, RS485 and ONVIF against required host functions.
Show heavy-load support and wind, cables and clearances.
Keep optional lenses unresolved until written confirmation.
The retained table defines the standard starting point: a 2 MP visible channel with 52× optical zoom and 640 × 512 thermal imaging with a 30–150 mm lens. Use that pair to write the observation task. Other visible or thermal lens combinations stay in an option discussion rather than being merged into the baseline.
A heavy-load PTZ needs a site-specific support and wind review. Show the continuous-pan area, wiper clearance, service approach and cable bend space on the structure drawing. The drawing should also identify the environmental exposure for the IP66 assembly without turning that rating into a universal installation answer.
Feed the unit from DC 12 V and define how RS485 and ONVIF Profile S/G will be used by the host. The required camera movements and channel changes should be assigned to one route or the other. Optional lenses should not alter the control schedule until their configuration is confirmed.
Release WL-TX30-HD-RCX only when the standard visible/thermal build, support design and interface schedule agree. Check wind and service access at the actual site. If an alternative lens is needed, keep it as a separately identified option and request the matching mechanical and optical details.
The long-range use case should describe what the visible and thermal operators need to inspect, not assert a detection result. A railway, substation, border or forest site can impose different viewing and maintenance priorities even when the same standard channels are used. Put those priorities into the patrol or control plan.
For the structure review, identify the support material, exposed height, cable entry and access route available to service the wiper. Keep the continuous-pan zone free of handrails, roofs and other equipment. Wind assessment belongs to the project engineer; neither the product category nor the IP66 rating supplies a site calculation.
When an optional lens is requested, require a response that preserves the model and channel mapping. The alternative should not silently replace the 52× visible or 30–150 mm thermal values in the retained baseline.
A useful comparison sheet should show the retained visible channel beside the retained thermal zoom range, then add a separate row for any requested alternative. That layout makes the optical change visible to engineering and procurement without rewriting the standard table. It also gives the supplier a clear place to return the matching dimensions or support implications.
Use Kontaktieren Sie uns to send the standard visible/thermal build, structural drawing and required functions. Identify optional lenses as pending and describe the exposed-site service route.
