WL-HLC-SX4G-IR supports temporary monitoring with 1080p video, H.265/H.264, dual streams, 4G, Wi-Fi AP/STN, GPS/Beidou, SD storage up to 128 GB, local monitoring and PTZ control. Placement options include its magnetic base, a telescopic tripod or a vehicle position.
Select WL-HLC-SX4G-IR around temporary uplink and stream plan. Define that task before comparing options.
Build the operator sequence around temporary uplink and stream plan; state the view, detail and mode change needed.
Investigation, public safety, fire response, traffic and insurance-claim field work are identified uses. The deployment team still has to select the uplink, physical placement and field-power method.
Put magnetic/tripod placement on the drawing and leave unresolved mechanics pending.
Map 4G, Wi-Fi and RJ45 to host functions one by one rather than relying on names.
Check the charging and external-power arrangement; the battery-runtime value remains pending.
Send the temporary uplink plan, stream requirement, magnetic or tripod placement and chosen 4G, Wi-Fi or RJ45 route. Request written confirmation of the battery-runtime value.
| 제품 이름 | WiFi 4G HD PTZ 카메라 | |
| 운영 시스템 | 리눅스 | |
| 동영상 | 비디오 압축 형식 | H.265 {{url_placeholder_0}} 비디오 압축 코딩 |
| 이중 스트림 | 메인 하위 스트림 | |
| 해결 | 1080p {{url_placeholder_0}} | |
| 미리보기 기능 | 지원하다 | |
| 저장 | 로컬 스토리지 | 1 SD 카드, 최대 지원 128g |
| 무선 네트워크 | 4g {{url_placeholder_0}} | 이중 4G 모듈 지원, 전체 네트워크 또는 개인 네트워크 계약 지원 |
| 와이파이 | 내장 Wi-Fi 모듈, 지원 802.11b {{url_placeholder_0}}} | |
| 핫스팟 모드 | 4G AP 핫스팟 모드를 지원하고 연결 라우터 STN 모드를 지원합니다 | |
| 포지셔닝 | GPS | 내장 GPS |
| 확장 인터페이스 | RJ45 네트워크 인터페이스 、 충전 인터페이스 | |
| 카메라 | 이미지 센서 | 1 {{url_placeholder_0}} 프로그레시브 스캔 CMOS |
| 신호 시스템 | pal {{url_placeholder_0}} | |
| 조명 | 0.005LUX @(F1.2, AGC ON) 색상
0.001lux @(f1.2, agc on) 흰색 검은 색 |
|
| 날 {{url_placeholder_0}} | ICR IR 필터 유형 | |
| 전자 셔터 | 1 {{url_placeholder_0}} ~ 1 {{url_placeholder_1}} | |
| 디지털 줌 | 16x | |
| 해결 | 1920 × 1080 {{url_placeholder_0}} 25fps {{url_placeholder_1}} | |
| 화이트 밸런스 | 자동 / 매뉴얼 / Sunny / Cloudy / Dusk / 백열 / 나트륨 / 형광 / 하나 추적 / 자동 추적 | |
| 3D 노이즈 감소 | 지원하다 | |
| 광학 줌 | 20엑스 | |
| ir | 60-80m | |
| PTZ 프로토콜 | pelco-d {{url_placeholder_0}} | |
| PTZ | 팬 회전 각도 | 360 ° |
| 틸트 회전 각도 | -20 ° ~ 90 ° | |
| 배터리 | 대용량 리튬 배터리 팩, 나머지 전원 팁 | |
| 전원 공급 장치 | 충전 시간 | <5 시간 |
| 온도 | -15 50 +50 ℃ | |
| 작업 환경 | 습기 | <90% |
| 측정하다 | 268*146mm (hmax*dmax) | |
| 무게 | 순 중량 ： 4kg | |
| 총 중량 ： 10kg | ||
Related products are grouped in the Rapid Deployment Dome PTZ Camera category. Compare the imaging task, mounting, power and control route together rather than selecting on one distance or zoom figure.
Begin with temporary uplink and stream plan.
Check 4G, Wi-Fi and RJ45 against required host functions.
Show magnetic/tripod placement, cables and clearances.
The battery-runtime value remains pending until written confirmation.
Choose the uplink before the unit reaches the site. A 4G route, Wi-Fi AP/STN mode and RJ45 connection solve different field arrangements, so the request should name the primary path and any required fallback. The 1080p dual-stream plan then needs to match the receiving and storage workflow.
Show whether the camera will use its magnetic base, a telescopic tripod or a vehicle position. The drawing should include PTZ movement, cable access and the working area around the temporary support. GPS/Beidou positioning and local monitoring can be assigned to the deployment procedure where required.
State the charging or external-supply method and keep the battery-runtime value pending until written confirmation. The deployment plan should also show how the unit will be recharged between assignments. SD storage up to 128 GB is a separate capacity fact and does not define operating time.
Before dispatch, verify the selected uplink, stream destination, physical placement and power plan. Confirm that the magnetic or tripod arrangement suits the actual location. The battery-runtime value remains pending and requires written confirmation before it is used to schedule field coverage.
Prepare the SD card and local-monitoring role separately from the live uplink. GPS/Beidou data, PTZ control and video delivery should each have a named destination in the field procedure. This keeps a temporary deployment understandable when the operator changes from 4G to Wi-Fi or RJ45.
Use 저희에게 연락하십시오 to send the uplink plan, stream destination, placement drawing and power method. Ask for the battery-runtime value and the planned field charging procedure in the written response.
