양적 장거리 열 이미징 PTZ 카메라

Product Overview

WL-TW10-4K-IR uses a 2 MP visible channel and 640 × 512 thermal imaging. Its retained table lists 52× visible zoom, a 50 mm thermal lens, continuous pan, RS485, ONVIF Profile S/G, IP66 and wiper support; the narrative states 12 V vehicle power. The supplied model name is retained without interpreting the suffix.

Select WL-TW10-4K-IR around retained 2 MP/thermal build. Define that task before comparing options.

Set the Viewing Task

Build the operator sequence around retained 2 MP/thermal build; state the view, detail and mode change needed.

Vehicle or marine surveillance, law-enforcement and emergency fleets, fire-control vehicles, ambulances and power-line observation are listed uses. The retained 2 MP/thermal configuration, not the application label, controls the selection.

Plan Movement and Mounting

Put 8 kg movement envelope on the drawing and leave unresolved mechanics pending.

Choose Power and Control

Map DC 12 V, web and RS485 to host functions one by one rather than relying on names.

Check installed power and cabling; keep 4K suffix meaning separate until confirmed.

Prepare the Configuration Request

Send retained 2 MP/thermal build, 8 kg movement envelope and DC 12 V, web and RS485; flag 4K suffix meaning for confirmation.

Selection Guidance

그만큼 Vehicle PTZ Camera category provides the relevant product group for WL-TW10-4K-IR. Base the comparison on the retained 2 MP and thermal specification, DC 12 V supply, drawing and required web or RS485 functions.

What is the first decision for WL-TW10-4K-IR?

Begin with retained 2 MP/thermal build.

Which integration items need checking?

Check DC 12 V, web and RS485 against required host functions.

What belongs on the mechanical drawing?

Show 8 kg movement envelope, cables and clearances.

Which item must remain pending?

Keep 4K suffix meaning unresolved until written confirmation.

Use the Retained WL-TW10-4K-IR Specification

Selection must follow the values actually shown on the page: a 2 MP visible channel with 52× optical zoom and a 640 × 512 thermal channel with a 50 mm lens. The model name remains unchanged, but it is not evidence for a different output resolution. Compare the required visible and thermal views against this retained build.

Place the 8 kg load and continuous-pan movement envelope on the vehicle or marine support drawing. The dimension image, cable exit, wiper area and nearby structures need to be reviewed together. A support that carries the static load but obstructs movement is not a complete layout.

The page identifies DC 12 V power, web access, RS485 and ONVIF Profile S/G. Assign the required controls to those paths and show the supply at the camera connection. Any interpretation of the model suffix stays out of the purchase description unless a separate confirmed specification is provided.

Consistency Check for the Retained Build

Compare the inquiry with the standard table one last time. Visible resolution, thermal resolution, lens, weight and control route should all describe the same WL-TW10-4K-IR configuration. Keep optional combinations separate and do not use the model name to replace a stated page value.

If the project needs another visible resolution, request it as a separate configuration with its own supporting specification. Do not alter the retained 2 MP baseline by interpretation.

Send WL-TW10-4K-IR Project Details

Use 저희에게 연락하십시오 to send retained 2 MP/thermal build, the drawing and required functions. Identify 4K suffix meaning as pending.