구형 광전성 고화질 PTZ 카메라

Product Overview

WL-HA988 combines visible imaging, thermal imaging and laser illumination in a spherical PTZ. Autofocus, linked lens and laser-angle control, thermal polarity modes, continuous pan, RS485/TCP/IP, 256 presets and nine cruise lines are listed. The table separates WL-HA988C, WL-HA988E and WL-HA988F optical and thermal choices.

Select WL-HA988 around one C/E/F variant. Define that task before comparing options.

Set the Viewing Task

Build the operator sequence around one C/E/F variant; state the view, detail and mode change needed.

The product scope covers oil or pipeline surveillance, borders, coasts, waterways, ports, reservoirs, forest-fire prevention, high points, transport routes and airports. None of those labels selects a C, E or F variant; the optical and thermal task must do that.

Plan Movement and Mounting

Put 95 kg support and service space on the drawing and leave unresolved mechanics pending.

Choose Power and Control

Map RS485 or TCP/IP to host functions one by one rather than relying on names.

Check installed power and cabling; keep customized ranging/tracking separate until confirmed.

Prepare the Configuration Request

Send one C/E/F variant, 95 kg support and service space and RS485 or TCP/IP; flag customized ranging/tracking for confirmation.

Selection Guidance

Related products are grouped in the New Product category. Compare the imaging task, mounting, power and control route together rather than selecting on one distance or zoom figure.

What is the first decision for WL-HA988?

Begin with one C/E/F variant.

Which integration items need checking?

Check RS485 or TCP/IP against required host functions.

What belongs on the mechanical drawing?

Show 95 kg support and service space, cables and clearances.

Which item must remain pending?

Keep customized ranging/tracking unresolved until written confirmation.

Choose One WL-HA988 Variant

The existing table separates WL-HA988C, WL-HA988E and WL-HA988F. Put one suffix on the request and carry its listed optical and thermal choices through the rest of the document. Mixing cells from the three columns would create a configuration that the current evidence does not define.

A 95 kg assembly needs a support plan before controls are discussed. Show the bearing surface, fasteners, service approach and unobstructed movement area. The spherical housing also needs access for cabling and maintenance; these spaces belong on the project drawing rather than in a generic product assumption.

Decide whether RS485 or TCP/IP will carry each required operation, then identify the receiving endpoint. Ranging and tracking are described as customized functions. They should be placed in a separate option request with their required behavior, not folded into the selected C, E or F variant by default.

WL-HA988 Order Review

The last review has three anchors: one variant suffix, one support drawing and one control route. Check that the optical/thermal choice comes from the same table column and that service access is shown for the 95 kg unit. Customized ranging or tracking remains outside the base build unless the written response adds it.

The request should also state how presets and cruise lines will be used, because the page lists 256 presets and nine cruise lines. Those functions may be planned after the C, E or F hardware choice is fixed. They do not justify moving a lens or thermal option between variant columns, and they do not turn customized tracking into a standard feature.

Send WL-HA988 Project Details

Use 저희에게 연락하십시오 to send one C/E/F variant, the drawing and required functions. Identify customized ranging or tracking as pending and state the available service approach.